Precision Speed Control type LTR/16SR

This unit is designed to set precision crystal speeds for Arriflex 16SR and Aaton LTR/XTR cameras.

Specifications:

• Crystal speeds from 1.999 to 79.999 fps in .001 fps increments
• 5 digit push button decimal speed switches
• Phase shift button (synchronizes the film to monitor/projector images and HMI lights)
• Camera On/Off switch
• LED indicators: red - power ON, green - camera RUN
• Size: 5 x 2.7 x 0.75 inches
• Body: extruded aluminum (black)
• Power requirement: 10 to 17VDC (50mA), taken from the camera accessory connector.

Precision Speed Control PSC200

Synchronizes Arriflex, Aaton or Panavision cameras to:

• Video monitors: NTSC, PAL, SECAM
• Computer monitors
• HMI lights
• Projector images
  

Specifications:

• Crystal speeds from 1.999 to 199.999 fps in .001 fps increments
• 6 digit push button decimal speed switches
• Phase shift button (synchronizing the film to a flickering image)
• Camera On/Off switch
• RCA input for auto synchronization to any video monitor. When filming a monitor and the video signal is connected to RCA input, the control will automatically phase the scan bar to the preset position for filming. This will provide scan bar free images without the need to phase each time the camera is turned on.
• Size: 5 x 2.7 x 0.75 inches
• Body: extruded aluminum (black)
• Power requirement: 10 to 24VDC (65mA), taken from the camera accessory connector.

  ---

  | HOME | SERVICE | CATALOG | E-MAIL | PAYMENT OPTIONS | WARRANTY |

  Copyright © 2002-2008 by AZ Spectrum. All rights reserved.