350W Camera Power Supply
Specifications:
- Output:
Channel 1 (main): 24V DC, 15A; XLR3 receptacle, pins 1+,
2-
Channel 2: 12V DC, 2A; XLR4 receptacle, pins 1-, 4+
- Input:
90-132VAC/180-264VAC, 47-440Hz -autoranging.
- Ripple and Noise:
channel 1 - 50mV p-p max, channel 2 - 20mV p-p max.
- Operating
Temperature: 0-50°C at full rated load. Unit is equipped
with overtemperature shutdown.
- Overvoltage
Protection (OVP) on outputs is set between 1 to 2 volts.
This protection is reset by recycling input power.
- Overload Protection:
All outputs are protected against overload and short
circuit conditions. Recovery is automatic when load is
reduced.
- Power good LEDs
indicators.
- On/off switch.
- Body: Black anodized
aluminum.
- Sixe: 3.5 x 8 x 16.7
inches.
- Weight: 10 lbs.
2x120W Camera
Power Supply
Specifications:
- Output:
Channel 1: 12V DC, 10A; XLR4 receptacle, pins 1-, 4+
Channel 2: 12V DC, 10A; XLR4 receptacle, pins 1-, 4+
- Input: 115VAC/60Hz or
220VAC/50Hz
- Ripple and Noise:
50mV p-p max.
- Operating
Temperature: 0-50°C at full rated load.
- Overvoltage
Protection (OVP) on outputs is set between 1 to 2 volts.
This protection is reset by recycling input power.
- Overload Protection:
All outputs are protected against overload and short
circuit conditions. Recovery is automatic when load is
reduced.
- Power good LEDs
indicators.
- Power On/Off switch.
- Body: Black anodized
aluminium.
- Size: 3.5 x 8.4 x 10
inches.
- Weight: 6 lbs
| HOME
| SERVICE
| E-MAIL
| PAYMENT OPTIONS
| WARRANTY |